Boat and yacht building
-
Extra-cut polishing abrasive paste used to effectively and quickly remove imperfections and dullness caused by sanding with P600–P800 grit (depending on resin hardness), or to restore heavily oxidized gelcoats, without overheating the surface.
CUT
FINISH -
Extra-cut polishing abrasive paste used to effectively and quickly remove imperfections and dullness caused by sanding with P600–P800 grit (depending on resin hardness), or to restore heavily oxidized gelcoats, without overheating the surface.
CUT
FINISH
-
Fluid polishing abrasive paste for gelcoat and painted surfaces. This polishing compound, developed by Pai Boat Composites, effectively removes P1000–1500 sanding marks, as well as yellowing, oxidation, scratches, and dullness.
CUT
FINISH
-
Fluid polishing abrasive paste for gelcoat and painted surfaces. This polishing compound, developed by Pai Boat Composites, effectively removes P1000–1500 sanding marks, as well as yellowing, oxidation, scratches, and dullness.
CUT
FINISH
-
Medium-cut polishing paste, suitable for working on gelcoat, lacquered, painted surfaces, and enamels. The Pai Boat Composites PERLA 15 polishing compound effectively removes P1500–2000 sanding marks, as well as medium-level oxidation, scratches, and dullness.
CUT
FINISH
-
Medium-cut polishing paste in dark colour, suitable for working on gelcoat, lacquered, painted surfaces, and enamels. The Pai Boat Composites PERLA 15 polishing compound effectively removes P1500–2000 sanding marks, as well as medium-level oxidation, scratches, and dullness.
CUT
FINISH
-
TOPFINISH 3 is the anti-holograms and nano-abrasives based refinishing polish for boats as well as for various components in the automotive industry. Pai Boat Composites polish TOPFINISH 3 is able to permanently remove holograms, swirls and polishing marks from gelcoat as well as from lacquer and painted surfaces.
CUT
FINISH
-
"TOPFINISH 3 BLACK is the anti-hologram finishing polish for yachts and boats, specifically designed for dark surfaces, and also suitable for automotive parts. This nano-abrasive-based polish is capable of permanently removing holograms, micro-scratches, and polishing marks from both gelcoat and painted or enamelled surfaces.
CUT
FINISH
-
"UV SHIELD is the super protective and ultra-performing wax for gelcoat and composite materials as well as painted surfaces and lacquer. Pai Boat Composites wax UV SHIELD was born to offer a long lasting protection to boats in the harsh marine environment. UV SHIELD has amazing water beading properties and it is highly resistant, as it leaves a thin but tough film that anchors to the surface, keeping it shiny and protected from UV rays, weathering, pollution, tree sap, droppings.
-
FLASH-TOUCH quick cleaning and polishing of boats, carbon as well as parts epoxy tables . FLASH-TOUCH is a performing 3in1 spray product, which cleans, polishes and protects gelcoat, resins, lacquers, plastics and rubber.
-
Specific product for surface cleaning before polishing, as well as for a good control of the elimination of sandpaper scratches. Through its innovative components, this specific cleaner removes layers that usually hides defects and marks and brings up scratches, holograms and hazes, without affecting the gloss level. It may be used to clean also plastics, rubber, glasses, resins as well as painted surfaces and lacquers.
